From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat Aug 18 2007 - 01:31:02 ART
Actually it doesn't matter how you connect BB1 and BB3. They just need to
peer BGP. You can use Ethernet, Serial, aux-to-aux, etc as long as you
have IP connectivity.
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
>----- Original Message -----
Subject: Merging BB1 configuration with FR and BB's connectivity to the
network (IEV4)
Date: Fri, August 17, 2007 20:50
From: "Joseph Saad" <joseph.s.saad@gmail.com>
> I am attempting to merge BB1 configuration with FRSW on a 2511 to no avail.
>
>
>
> BB1 is using serial 0 to the FRSwitch and it seem to be always only
> connected to R6 via multiple DLCI's. is this correct?
>
>
>
> I am fully confused and unable to reconcile the connections between BB1 and
> BB3 either. Are they connected via Serial as per
> http://www.internetworkexpert.com/resources/ccierack.htm or are they
> connected via Ethernet? All the labs show no serial connection though as
far
> as my skimming the 30 labs of VolII and VOLIII.
>
>
>
> If they are how would all the other labs are actually showing them as being
> disconnected?
>
>
>
> Can anyone share own FR configuration with BB1 merged on it on a 2511 . and
> the potential issues if any.
>
>
>
> Thanks & regards,
>
> Joseph.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART