From: CCIE 19999 (ccie@iprimus.com.au)
Date: Fri Aug 17 2007 - 21:48:05 ART
Thanks Victor.
-----Original Message-----
From: Victor Cappuccio [mailto:vcappuccio@ccbootcamp.com]
Sent: Saturday, 18 August 2007 10:39 AM
To: CCIE 19999; Cisco certification
Subject: RE: TCL script for 3550/3560
http://www.groupstudy.com/archives/ccielab/200608/msg01708.html
Sw1(config)#macro name ping
Enter macro commands one per line. End with the character '@'.
do ping 154.1.6.6
do ping 154.1.3.3
@
Sw1(config)#
Sw1(config)#macro global apply ping
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 154.1.6.6, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 124/124/124 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 154.1.3.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 60/61/64 ms
Sw1(config)#
thanks,
Victor Cappuccio.-
- CCSI# 31452
CCBOOTCAMP - A Cisco Sponsored Organization (SO)
vcappuccio@ccbootcamp.com
Toll Free: 877-654-2243
Direct: +1-702-968-5100 = Outside the USA
FAX: +1-702-446-8012
YES! We take Cisco Learning Credits!
Training And Remote Racks: http://www.ccbootcamp.com
Register to win a free iPhone! http://www.ccbootcamp.com/iphone.html
-----Original Message-----
From: nobody@groupstudy.com on behalf of CCIE 19999
Sent: Sat 18-Aug-07 11:28 PM
To: Cisco certification
Subject: TCL script for 3550/3560
HI guys,
I am just wondering how you guys would run a ping test from a switch. I have
tried the tcl script on the switches and obviously it won't work. I have
searched in the archives and googled and could not find what I am looking
for.
Can you guys help me?
Thank you,
Shine
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART