From: WorkerBee (ciscobee@gmail.com)
Date: Thu Aug 16 2007 - 17:34:31 ART
Did you receive the iBGP routes from the route reflector?
From R3,
show ip bgp neigh [R2] received-routes
If Yes,
- Check if R3 has the next hop to this received routes, else
R1 set next-hop-self for this prefix or make sure R3 can
reach this next hop via IGP.
If No,
- Please send us your full config and bgp output
On 8/17/07, Germany <ccie.gergonza@gmail.com> wrote:
> Hey guys how are you doing. Well according to my previous knowledge and
> also to the DocCD, a route coming from a route-reflector client would be
> propagated to a iBGP non-client right? I have the following setup
>
>
> R1 ---- R2 ---- R3 ----- R4
>
> Where R2 is setup with
> Neighbor R1 route-reflector-client
>
>
> And R3 with
> Neighbor R4 route-reflector client
>
>
> Both R1 and R4 have eBGP connections, and it is my understanding that R2
> should be sending the prefixes learnt from R1 to R3 and R3 should be sending
> the prefixes learnt from R4 to R2. However, this configuration is not
> working. Any help is appreciated, Thanks guys!!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART