From: Robert Hosford (rhosford@certifiednets.com)
Date: Thu Aug 16 2007 - 17:14:13 ART
What show commands have you used to figure this out?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Germany
Sent: Thursday, August 16, 2007 4:11 PM
To: 'Cisco certification'
Subject: BGP Route-Reflectors
Hey guys how are you doing. Well according to my previous knowledge and
also to the DocCD, a route coming from a route-reflector client would be
propagated to a iBGP non-client right? I have the following setup
R1 ---- R2 ---- R3 ----- R4
Where R2 is setup with
Neighbor R1 route-reflector-client
And R3 with
Neighbor R4 route-reflector client
Both R1 and R4 have eBGP connections, and it is my understanding that R2
should be sending the prefixes learnt from R1 to R3 and R3 should be sending
the prefixes learnt from R4 to R2. However, this configuration is not
working. Any help is appreciated, Thanks guys!!
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART