From: Joseph Brunner (joe@affirmedsystems.com)
Date: Wed Aug 15 2007 - 23:49:56 ART
Use the physical interface when it tells you too (LOL)
Use multipoint interface when you need to use the interface for another
point to point later on, either to make another subnet or due to the wording
of the tasks...
Remember, to "read an entire section before configuring ANYTHING in that
section".
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
slevin kremera
Sent: Wednesday, August 15, 2007 9:35 PM
To: Cisco certification
Subject: iewb-v3 vol 2 lab7-TASK2.2 when to use FR multipoint /p2p and when
not to...
HI GS
Looking at the task..just gives one a fair bit of idea.so i configure ip
address on Serial interface of R1 with a FR map statement and similar thing
on R5 with FR interface-dlci and i could ping end-end.But looking at the
solution gives me jitters.So whats the catch here?
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART