From: Joseph Brunner (joe@affirmedsystems.com)
Date: Wed Aug 15 2007 - 19:06:32 ART
Please post the rest of the config... we'll hammer it out and see what's
wrong... those are first octet odd/evens...
Are you running sparse mode, dense mode, or sparse-dense mode on the
interfaces?
If you are running sparse-mode did you remember to add
"ip pim auto-rp listener"?
How are you seeing failure?
Did you do "show ip pim rp" from the MA?
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Prasad Shemrudkar (pshemrud)
Sent: Wednesday, August 15, 2007 5:39 PM
To: Cisco certification
Subject: AutoRP filter-list
Hi,
R1, R2 and R3 are running auto-rp. R3 is the MA with R1 and R2 being the
candidate RPs. Task requires you to configure R3 to map first octet odd
to R2 and first octet even to R1.
I am using the following group-list on all 3:
ip access-list standard EVEN
permit 0.0.0.0 254.255.255.255
ip access-list standard ODD
permit 1.0.0.0 254.255.255.255
but the MA fails to map the discovery packets. I do not understand
what's wrong with the ACL?
Prasad
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART