From: ccie1101 (ccie1101@gmail.com)
Date: Tue Aug 14 2007 - 13:20:30 ART
Can we select say only say 3 routers R1, R2 and R3 ?
Looks like the 'send' command sends to all the equipment .....
On 8/15/07, Marc La Porte <marc.a.laporte@gmail.com> wrote:
>
> 2509# *send* *
>
> Enter message, end with CTRL/Z; abort with CTRL/C:
>
> The system 2509 will be shut down in 10 minutes for repairs.^Z
>
> Send message? [confirm]
>
> 2509#
>
> ***
>
> ***
>
> *** Message from tty0 to all terminals:
>
> ***
>
> The system 2509 will be shut down in 10 minutes for repairs.
>
>
>
> On 8/14/07, ccie1101 <ccie1101@gmail.com> wrote:
>
> > Hi,
> > Is there a way to send commands to the routers/switches ? This
> > will
> > definitely speed things up and then we can go to the relevant equipment
> > and
> > do the verification ? .....
> >
> > 1) I heard that there to send commands from the terminal server
> > but
> > I am not too sure what is the command to do this ?
> >
> > 2) On the same note, any other tips/tricks for increasing speed
> > in
> > the lab other then using aliases ?
> >
> > Thanks in advance,
> >
> > Cheers,
> >
> > ccie1101.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART