RE: Cat6K keeps crashing

From: Vishal Patel (vishalp@clevercomms.com)
Date: Fri Aug 10 2007 - 01:55:20 ART

I would suggest , remove all the cards and connect just 1 PS and SUP mode
and try to boot.

 

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Loc
Pham
Sent: Friday, 10 August 2007 2:08 PM
To: Sadiq Yakasai; Cisco certification
Subject: Re: Cat6K keeps crashing

  What is the condition of the power supply # 1 and 2 ?
  Show power status all or something similar with hybrid will show anything
wrong with the PS,.
  Stuff the errors @ cisco for others .
  HTH,
  Loc
--- Sadiq Yakasai <sadiqtanko@gmail.com> wrote:

> Hey Guys,
>
> PLease does any know why a Cat6k keeps crashing after booting up for
> like every 5 minutes.
>
> Its a Cat 6009 series, running a Sup2 Supervisor card in native mode.
>
> CAT-3#sh ver | inc IOS
> IOS (tm) c6sup2_rp Software (c6sup2_rp-PK2SV-M), Version 12.1(22)E1,
> EARLY DEPLO YMENT RELEASE SOFTWARE (fc1)
>
>
> Just before is crashes everytime, this is the log messages it prompts:
>
>
----------------------------------------------------------------------------
---------------------------------------------------------------------------- 

--
> CAT-2>
> CAT-2>
> 00:01:09: %C6KPWR-SP-4-PSFAIL: power supply 2 output
> failed.
> 00:01:09: %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in
> power-redundancy mode, system i.
> 00:01:15: %C6KPWR-SP-4-PSOK: power supply 2 turned
> on.
> 00:01:15: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in
> power-redundancy mode, system .
> 00:01:17: %C6KPWR-SP-4-PSFAIL: power supply 2 output
> failed.
> 00:01:17: %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in
> power-redundancy mode, system i.
> 00:01:25: %C6KPWR-SP-4-PSOK: power supply 2 turned
> on.
> 00:01:25: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in
> power-redundancy mode, system .
> 00:01:26: %ONLINE-SP-6-INITFAIL: Module 1: Failed to
> synchronize Port asic
> 00:01:27: %C6KPWR-SP-4-PSFAIL: power supply 2 output
> failed.
> 00:01:27: %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in
> power-redundancy mode, system i.
> 
> %Software-forced reload
> 
> 
> Unexpected exception, CPU signal 23, PC = 0x402950FC
> 
> 
> -Traceback= 402950FC 40293278 40363FA4 40363FD4
> 403F81A8 40354164 403541C0 4032C
> $0 : 00000000, AT : 41AC0000, v0 : 41EE0000, v1 :
> 00000001
> a0 : 41EDB0B4, a1 : 0000F100, a2 : 00000000, a3 :
> 41A50000
> t0 : 40299880, t1 : 3401F101, t2 : 40299890, t3 :
> FFFF00FF
> t4 : 40299880, t5 : 0000001C, t6 : 6F6E202C, t7 :
> 00000002
> s0 : 00000000, s1 : 00000000, s2 : 428DA9D0, s3 :
> 428DA9D0
> s4 : 0E4322FA, s5 : 00000040, s6 : 00009000, s7 :
> 0000005E
> t8 : 00000000, t9 : 00000000, k0 : 00000000, k1 :
> 00000000
> gp : 41ACE440, sp : 422AB260, s8 : 00000000, ra :
> 40293278
> EPC  : 402950FC, ErrorEPC : BFC18A24, SREG     :
> 3401F103
> MDLO : 00000000, MDHI     : 00000000, BadVaddr :
> 8020C5E3
> CacheErr : F0800000, DErrAddr0 : 01EDB0B0, DErrAddr1
> : 022AB0F8
> Cause 00000024 (Code 0x9): Breakpoint exception
> Free space check for
> bootflash:crashinfo_20070807-103858 failed
> (140/17598)
> 
> 
> === Flushing messages (10:38:58 UTC Tue Aug 7 2007)
> ===
> 
> Buffered messages:
> 
> 00:00:36: %C6K_PLATFORM-5-LESS_SPACE: May not have
> enough space to save the cra
> 00:00:37: RP: Currently running ROMMON from F1
> region
> 00:00:48: %SYS-5-CONFIG_I: Configured from memory by
> console
> 00:00:49: %SYS-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) c6sup2_rp Software (c6sup2_rp-PK2SV-M),
> Version 12.1(22)E1, EARLY DEPL)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2004 by cisco Systems, Inc.
> Compiled Sat 17-Apr-04 04:00 by pwade
> 00:00:49: %SNMP-5-COLDSTART: SNMP agent on host
> CAT-2 is undergoing a cold start
> 00:00:49: %SYS-6-BOOTTIME: Time taken to reboot
> after reload =  309 seconds
> 00:00:40: %C6K_PLATFORM-SP-5-LESS_SPACE: May not
> have enough space to save the
> 00:00:40: SP: SP: Currently running ROMMON from F2
> region
> 00:00:49: %SYS-SP-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) c6sup2_sp Software (c6sup2_sp-SPV-M),
> Version 12.1(22)E1, EARLY DEPLOY)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2004 by cisco Systems, Inc.
> Compiled Sat 17-Apr-04 04:44 by pwade
> 00:00:50: %OIR-SP-6-INSPS: Power supply inserted in
> slot 1
> 00:00:50: %C6KPWR-SP-4-PSOK: power supply 1 turned
> on.
> 00:00:50: %OIR-SP-6-INSPS: Power supply inserted in
> slot 2
> 00:01:04: %C6KERRDETECT-SP-4-SWBUSSTALL: The
> switching bus is experiencing stals
> 00:01:05: %C6KPWR-SP-4-PSOK: power supply 2 turned
> on.
> 00:01:05: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in
> power-redundancy mode, system .
> 00:01:09: %C6KPWR-SP-4-PSFAIL: power supply 2 output
> failed.
> 00:01:09: %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in
> power-redundancy mode, system i.
> 00:01:15: %C6KPWR-SP-4-PSOK: power supply 2 turned
> on.
> 00:01:15: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in
> power-redundancy mode, system .
> 00:01:17: %C6KPWR-SP-4-PSFAIL: power supply 2 output
> failed.
> 00:01:17: %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in
> power-redundancy mode, system i.
> 00:01:25: %C6KPWR-SP-4-PSOK: power supply 2 turned
> on.
> 00:01:25: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in
> power-redundancy mode, system .
> 00:01:26: %ONLINE-SP-6-INITFAIL: Module 1: Failed to
> synchronize Port asic
> 00:01:27: %C6KPWR-SP-4-PSFAIL: power supply 2 output
> failed.
> 00:01:27: %C6KPWR-SP-4-PSREDUNDANTONESUPPLY: in
> power-redundancy mode, system i.
> Queued messages:
> 00:02:04: %SYS-3-LOGGER_FLUSHING: System pausing to
> ensure console debugging ou.
> 
> 00:02:01: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR
> peer has failed due to exc]
> 00:02:04: %SYS-SP-3-LOGGER_FLUSHED: System was
> paused for 00:00:00 to ensure co.
> 
> 00:02:05: %OIR-SP-6-CONSOLE: Changing console
> ownership to switch processor
> 
> 
> 
> *** System received a Software forced crash ***
> signal= 0x17, code= 0x428a0000, context= 0x428d9b84
> PC = 0x4012db2c, Cause = 0x1820, Status Reg =
> 0x34018002
> 
> System Bootstrap, Version 7.1(1)
> Copyright (c) 1994-2001 by cisco Systems, Inc.
> *** Mistral Interrupt on line 2 ***
> PC = 0xbfc1234c, Cause = 0x1000, Status Reg =
> 0x30419003
> ROM Monitor Can Not Recover From Exception
> A Board Reset Is Issued?
> System Bootstrap, Version 7.1(1)
> Copyright (c) 1994-2001 by cisco Systems, Inc.
> c6k_sup2 processor with 131072 Kbytes of main memory
> 
> Autoboot executing command: "boot
> bootflash:c6sup22-pk2sv-mz.121-22.E1.bin"
> 
> Self decompressing the image :
> #################################################
>
----------------------------------------------------------------------------
-------------------------------------------------
> 
> Any comments will be highly appreciated please.
> 
> Thanks
> 
> Sadiq
> 
>

This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:10 ART