From: Kun Han (ccie820@gmail.com)
Date: Wed Aug 08 2007 - 15:18:01 ART
Hello all,
I am using cisco 2511 router as termserver, I have about 5 cisco devices
connected to this router for console access
(using asyn cables).
When I try to access those devices I get "Password OK" without any other
response.
Dose anyone seen this issue?
below is config from the termserv router......
======================================================
sh run
Building configuration...
Current configuration:
!
! Last configuration change at 16:44:28 UTC Wed Aug 8 2007
! NVRAM config last updated at 13:16:51 UTC Tue Sep 12 2006
!
version 11.2
no service finger
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname F1-3a-labCON1
!
enable secret 5 $1$OlLA$iw
enable password 7 073D2045
!
partition flash 2 4 4
!
ip subnet-zero
no ip source-route
no ip gratuitous-arps
ip tcp synwait-time 10
ip domain-name mcilink.com
ip name-server 166.33.193.132
ip name-server 166.37.162.103
!
interface Ethernet0
description F1-3a Lab Console
ip address 153.39.108.131 255.255.255.224
no ip redirects
no ip directed-broadcast
no ip proxy-arp
!
interface Serial0
no ip address
shutdown
!
interface Serial1
no ip address
shutdown
!
ip default-gateway 153.39.108.129
ip classless
ip route 0.0.0.0 0.0.0.0 153.39.108.129
ip route 192.0.2.1 255.255.255.255 Null0
!
line con 0
password 7 097E4F0017071805
login
line 1 16
no exec
exec-timeout 180 0
login
modem InOut
transport preferred none
transport input all
stopbits 1
line aux 0
line vty 0 4
password 7 1337161B050E0B3D
login
length 50
width 122
!
ntp clock-period 17208371
ntp server 166.37.218.90 version 2
ntp server 166.33.229.10 version 2
end
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:10 ART