From: ISolveSystems (support@isolvesystems.com)
Date: Tue Aug 07 2007 - 13:43:23 ART
Below shows R4 R5 pim enabled interfaces and neighbours. What other config
do you want?
*R4*
Rack1R4#sh ip pim int
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prior
174.1.4.4 FastEthernet0/0 v2/SD 0 30 1
174.1.4.4
174.1.145.4 Serial0/0/0 v2/SD 2 30 0
174.1.145.1
Rack1R4(config)#do sh ip pim nei
PIM Neighbor Table
Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority,
S - State Refresh Capable
Neighbor Interface Uptime/Expires Ver DR
Address Prio/Mode
174.1.145.1 Serial0/0/0 00:52:30/00:01:27 v2 1 / DR S
174.1.145.5 Serial0/0/0 00:52:31/00:01:27 v2 0 / S
*R5*
Rack1R5#sh ip pim int
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prior
174.1.145.5 Serial0/0/0 v2/SD 2 30 0
174.1.145.1
192.10.1.5 FastEthernet0/1.52 v2/SD 0 30 1
192.10.1.5
Rack1R5#ping 150.1.1.1
On 8/7/07, Serhat Aslan <serhatworks@gmail.com> wrote:
>
> Did you check the unicast reachability of rp/agent to clients and pim
> enable interfaces ? if you did can you send the config ?
>
>
> Serhat Aslan
>
>
> On 8/7/07, ISolveSystems <support@isolvesystems.com> wrote:
>
> > I have tried the nbmp mode with same result.
> >
> > I have the broadcase keyword...
> > frame-relay map ip 174.1.145.4 104 broadcast
> > frame-relay map ip 174.1.145.5 105 broadcast
> >
> >
> > On 8/7/07, Salau, Yemi <yemi.salau@siemens.com> wrote:
> > >
> > > 1. tried ip pim nbma-mode on R1's serial interface?
> > > 2. Sure the FR interfaces/dlcis are broadcast compatible? ie.
> > > Frame-relay map with broadcast keyword?
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com ] On Behalf
> > Of
> > > ISolveSystems
> > > Sent: Tuesday, August 07, 2007 3:43 PM
> > > To: Group study
> > > Subject: RP mapping info not received
> > >
> > > Hello Expert,
> > > R1, R4, R5 are full meshed FR. R1 is the RP. R3 is the mapping
> > agent.
> > > All connected interfaces are configured with pim sparse dense mode and
> > > are
> > > all neighbor up.
> > >
> > > For some reason R4 and R5 are not receiving rp mapping from R3. Any
> > > idea?
> > >
> > > R4
> > > \
> > > \
> > > R1-----R3----R2
> > > /
> > > /
> > > R5
> > >
> > > Thanks.
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:09 ART