From: Hyunseog Ryu (r.hyunseog@ieee.org)
Date: Mon Aug 06 2007 - 02:10:03 ART
If you use Cisco 2511 with 16 async ports, you can set up loopback
address or use serial/ethernet address with additional port number for
reverse-telnet to each port.
Async port 1 ---> telnet x.x.x.x 2001 (x.x.x.x is interface
address of Cisco 2511 router, and port 2001 for telnet)
Async port 2 ---> telnet x.x.x.x. 2002
....
Async port 16 ---> telnet x.x.x.x 2016
So from telnet client, you can configure to telnet to specific port for
router console port access.
Hyun
Ron Lim wrote:
> Hi,
>
> How could I perform 16 concurrent session to terminal server without doing
> the Ctrl + Shift + 6, then X?
>
> Hope to simulate CCIE lab individual icon to each device.
>
> Thank you.
>
> Regards,
> gottobeccie
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:09 ART