From: Carlos glez (cciecarlogon@gmail.com)
Date: Sun Aug 05 2007 - 12:49:20 ART
thanks for your help guys, it is a bug in 12.3
CSCse72792 fix in 12.4
cheers!!
Carlos
On 8/5/07, Djerk Geurts <djerk@djerk.nl> wrote:
>
> Have a look at SR 606531639 "OSPF neighbors not shown in running
> config"...
>
> Djerk
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > Behalf Of Carlos glez
> > Sent: zondag 5 augustus 2007 8:42
> > To: ccielab@groupstudy.com
> > Subject: OSPF question
> >
> > Hi GS,
> >
> > I have a tiny problem that i cannot find the easy way out,
> > basically I am
> > just trying to get an ospf neigh up on a ethernet segmet but
> > using network
> > type non-brodacast
> > everytime i try to get the command neigh x.x.x.x under the
> > ospf process i
> > get the error that the int is not NBMA, but if you see the sh
> > ip ospf int ,
> > it is non-brodcast
> > have any of you guys have faced this, i might be missing
> > something really
> > basic, any help wiill be great, below are the configs ( this
> > exercise is in
> > IEwoorkbook lab1 version 3)
> >
> >
> > I did found that if i dont have a virtual link configured
> > going across that
> > interface there is no problem.
> >
> >
> >
> > R5
> > router ospf 1
> > router-id 150.1.5.5
> > log-adjacency-changes
> > area 45 virtual-link 150.1.4.4<------
> > redistribute eigrp 100 subnets
> > network 150.1.5.5 0.0.0.0 area 0
> > network 183.1.0.5 0.0.0.0 area 0
> > network 183.1.45.5 0.0.0.0 area 45
> >
> >
> > interface FastEthernet0/1
> > ip address 183.1.45.5 255.255.255.0
> > ip ospf network non-broadcast
> > ip ospf cost 65
> > duplex auto
> > speed auto
> > end
> >
> > FastEthernet0/1 is up, line protocol is up
> > Internet Address 183.1.45.5/24, Area 45
> > Process ID 1, Router ID 150.1.5.5, Network Type NON_BROADCAST, Cost:
> > 65<----
> > Transmit Delay is 1 sec, State WAITING, Priority 1
> > No designated router on this network
> > No backup designated router on this network
> > Timer intervals configured, Hello 30, Dead 120, Wait 120,
> > Retransmit 5
> > oob-resync timeout 120
> > Hello due in 00:00:27
> > Wait time before Designated router selection 00:00:57
> > Index 1/4, flood queue length 0
> > Next 0x0(0)/0x0(0)
> > Last flood scan length is 1, maximum is 7
> > Last flood scan time is 0 msec, maximum is 4 msec
> > Neighbor Count is 0, Adjacent neighbor count is 0
> > Suppress hello for 0 neighbor(s
> >
> > R5(config-if)#router ospf 1
> > R5(config-router)#neighbor 183.1.45.4
> > OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
> > networks
> > R5(config-router)#
> >
> > both router running Version 12.3(20)
> >
> >
> > R4(config-if)#do sh run int fas0/0
> >
> > !
> > interface FastEthernet0/0
> > ip address 183.1.45.4 255.255.255.0
> > ip ospf network non-broadcast
> > ip ospf cost 65
> > duplex auto
> > speed auto
> > end
> >
> > FastEthernet0/0 is up, line protocol is up
> > Internet Address 183.1.45.4/24, Area 45
> > Process ID 1, Router ID 150.1.4.4, Network Type
> > NON_BROADCAST, Cost: 65
> > Transmit Delay is 1 sec, State DR, Priority 1
> > Designated Router (ID) 150.1.4.4, Interface address 183.1.45.4
> > No backup designated router on this network
> > Timer intervals configured, Hello 30, Dead 120, Wait 120,
> > Retransmit 5
> > oob-resync timeout 120
> > Hello due in 00:00:20
> > Index 1/4, flood queue length 0
> > Next 0x0(0)/0x0(0)
> > Last flood scan length is 1, maximum is 7
> > Last flood scan time is 0 msec, maximum is 4 msec
> > Neighbor Count is 0, Adjacent neighbor count is 0
> > Suppress hello for 0 neighbor(s)
> >
> >
> > router ospf 1
> > router-id 150.1.4.4
> > log-adjacency-changes
> > area 45 virtual-link 150.1.5.5
> > network 150.1.4.4 0.0.0.0 area 0
> > network 183.1.0.4 0.0.0.0 area 0
> > network 183.1.45.4 0.0.0.0 area 45
> > network 183.1.46.4 0.0.0.0 area 46
> >
> > R4(config-if)#router ospf 1
> > R4(config-router)#neigh 183.1.45.5
> > OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
> > networks
> > R4(config-router)#
> >
> >
> >
> > cheers!!
> >
> > JC
> > <ccielab@groupstudy.com>
> >
> > ______________________________________________________________
> > _________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:09 ART