From: John Jones (acer0001@gmail.com)
Date: Sat Aug 04 2007 - 13:57:08 ART
Have you tried to create traffic, such as pinging the remote link-local
address? I've noticed that the discovery process in some IOS versions and
other 3rd party devices doesn't populate the neighbor table until traffic is
initiated.
Just my 2 cents...
John
On 8/3/07, Gary Duncanson <gary.duncanson@googlemail.com> wrote:
>
> Hi Sadiq,
>
> I can put the commands in. Just didn't get any output for show ipv6
> neighbors. Im just wondering what dependencies there are before that
> command
> will show something.
>
> Gary
> ----- Original Message -----
> From: "Sadiq Yakasai" <sadiqtanko@gmail.com>
> To: "Joseph Saad" <joseph.s.saad@gmail.com>
> Cc: "Gary Duncanson" <gary.duncanson@googlemail.com>;
> <ccielab@groupstudy.com>
> Sent: Friday, August 03, 2007 10:37 PM
> Subject: Re: IPv6 neighbors
>
>
> > Hi Duncan,
> >
> > 2 days ago, I had the same problem actually. I had 12.3(3) on a 3640,
> > and just didnt have any ipv6 command either at interface level or
> > global config level.
> >
> > However, the documentation for ipv6 says the commands have been
> > supported since 12.1 or so.... :s...
> >
> > I had to upgrade my image to 12.4(10) to get it up and running.
> >
> > Sadiq
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:09 ART