Re: OSPF:- Received invalid packet: mismatch area ID

From: ISolveSystems (support@isolvesystems.com)
Date: Wed Aug 01 2007 - 15:26:58 ART

• Next message: Djerk Geurts: "OSPF ACL"
• Previous message: Sadiq Yakasai: "Re: Re[2]: ccie lab RS - Facts"
• Maybe in reply to: ISolveSystems: "OSPF:- Received invalid packet: mismatch area ID"
• Next in thread: Clay K Auch \(clauch\): "RE: OSPF:- Received invalid packet: mismatch area ID"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thank you all for your help. The problem is the dynamic 0.0.0.0 FR mapping.
I reloaded R4 and R5 and the problem is gone.

Thanks.

On 8/1/07, Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
>
> Hi there,
>
> This typically shows up when you have a mismatch of Area ID from the
> opposite ends of the link....but ur interfaces seem to have the right
> Area ID's on them.
>
> I would say check the config again, could be the wildcasrd mask not
> properly configured.
>
> Sadiq

• Next message: Djerk Geurts: "OSPF ACL"
• Previous message: Sadiq Yakasai: "Re: Re[2]: ccie lab RS - Facts"
• Maybe in reply to: ISolveSystems: "OSPF:- Received invalid packet: mismatch area ID"
• Next in thread: Clay K Auch \(clauch\): "RE: OSPF:- Received invalid packet: mismatch area ID"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:09 ART