From: Uchil Perera (uchil.groupstudy@yahoo.com)
Date: Tue Jul 31 2007 - 18:58:12 ART
Hi,
Set the min cir value in the map-class FRTS. The policy map checks the min cir not the interface BW or CIR. The vlaue should be higher then the reserved bandwidth.
Regards
Alex Steer <alex.steer@eison.co.uk> wrote:
Hello
>> I/f Serial1/1 DLCI 103 class AUDIOUDP requested bandwidth 128 (kbps),
>> available only 28 (kbps)
Is the clock rate on your serial interface set to 64kbps by any chance?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brian Dennis
Sent: 31 July 2007 20:49
To: Herbert Maosa
Cc: Cisco certification
Subject: Re: FRTS "requested bandwidth 128 (kbps), available only 28
(kbps)"
That was the whole issue. The map class couldn't be applied.
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
On Jul 31, 2007, at 12:01 PM, Herbert Maosa wrote:
> Unless my eyes are deceiving me I dont see the frame map class FRTS
> being
> applied to the interface in this config ? Maybe you should past the
> entire
> config, as is ?
>
> Herbert.
>
> On 7/31/07, Edison Ortiz wrote:
>>
>> Include a CIR value in the map-class, else it will default to 56kbps.
>> You can verify with the 'show traffic-shape' command.
>>
>> map-class frame-relay FRTS
>> frame-relay cir 5600000
>>
>>
>>
>> Edison Ortiz
>> Routing and Switching, CCIE # 17943
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>> Behalf Of
>> ISolveSystems
>> Sent: Tuesday, July 31, 2007 12:18 PM
>> To: Cisco certification
>> Subject: FRTS "requested bandwidth 128 (kbps), available only 28
>> (kbps)"
>>
>> Hi Experts,
>> I get the following error when applying FRTS with priority queing
>> to a FR
>> interface. I have the bandwidth set to 5600000k, but I got the
>> following
>> error. I have also configured the max reserved bandwidth to 100%.
>>
>> Rack1R1(config-if)#frame-relay cla FRTS
>> I/f Serial1/1 DLCI 103 class AUDIOUDP requested bandwidth 128 (kbps),
>> available only 28 (kbps)
>>
>> class-map match-all AUDIOUDP
>> match access-group 100
>> !
>> !
>> policy-map AUDIOUDP
>> class AUDIOUDP
>> priority 128 8000
>> class class-default
>>
>>
>> map-class frame-relay FRTS
>> service-policy output AUDIOUDP
>> !
>> access-list 100 permit udp any any eq 7070
>>
>>
>> interface Serial1/1
>> bandwidth 5600000
>> no ip address
>> encapsulation frame-relay
>> shutdown
>> serial restart-delay 0
>> no dce-terminal-timing-enable
>> no fair-queue
>> frame-relay traffic-shaping
>> frame-relay map ip 1.1.1.1 103
>> max-reserved-bandwidth 100
>> end
>>
>> _____________________________________________________________________
>> __
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>> _____________________________________________________________________
>> __
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
>
> --
> Kindest regards,
> hm
>
> ______________________________________________________________________
> _
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART