From: A Murty (a.murty@tcs.com)
Date: Tue Jul 31 2007 - 04:43:11 ART
HI,
Refer this link and tune your metrics to achieve the desired result.
http://www.cisco.com/warp/public/103/19.html#traffic
Regards
A B S Rama Chandra Murty
Assistant Consultant
Tata Consultancy Services
Mailto: a.murty@tcs.com
Website: http://www.tcs.com
____________________________________________
Experience certainty. IT Services
Business Solutions
Outsourcing
____________________________________________
ISolveSystems <support@isolvesystems.com>
Sent by: nobody@groupstudy.com
07/30/2007 10:02 PM
Please respond to
ISolveSystems <support@isolvesystems.com>
To
"Cisco certification" <ccielab@groupstudy.com>
cc
Subject
EIGRP Metric and Variance Ratio calculation
Hi Experts,
May I know what the best way to figure out what variance and delay values
I
need to use for the following question?
Configure the network in such a way that traffic from R4 destined to
prefixes 1.1.1.0 is load balance out the Ehternet link to R5 and the FR
link
to R1.
Traffic should be distributed between the Eth and the FR links in a ratio
of
4:1.
R4 and R5 are connected via Ethernet. R4 connects to R1 via FR. R1
connects
to R5 via FR. FR connections use physical interfaces.
R4
| \
| \
| R1
| /
| /
R5
|
Net 1.1.1.1
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART