RE: Connected interface appear as External

From: CCIE 19999 (ccie@iprimus.com.au)
Date: Mon Jul 30 2007 - 20:18:01 ART

• Next message: Scott Morris: "RE: Unique AS number when connecting to two different ISP's?"
• Previous message: Ryan: "Re: Unique AS number when connecting to two different ISP's?"
• Maybe in reply to: CCIE 19999: "Connected interface appear as External"
• Next in thread: Djerk Geurts: "RE: Connected interface appear as External"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Alex,

That's what I thought, but just wanted a confirmation.

Thanks,

Shine

  _____

From: Alexey Tolstenok [mailto:alextols@gmail.com]
Sent: Tuesday, 31 July 2007 7:33 AM
To: CCIE 19999
Cc: ccielab@groupstudy.com
Subject: Re: Connected interface appear as External

INo, since you cannot make the AD of EIGRP route (when disabling eigrp
split-horizon on neighbor) lower than "connected" AD = 0 or increase AD of
"connected"

2007/7/31, CCIE 19999 < ccie@iprimus.com.au>:

Hi Folks,

Is there a way actually you can make a connected prefix appear as external?

For example, 151.10.1.2 is a connected interface on R1 and the routing
protocol is EIGRP.

I am wondering if it is possible to make the prefix appear as D EX in router

R1 instead of as Connected.

TIA,

Shine

• Next message: Scott Morris: "RE: Unique AS number when connecting to two different ISP's?"
• Previous message: Ryan: "Re: Unique AS number when connecting to two different ISP's?"
• Maybe in reply to: CCIE 19999: "Connected interface appear as External"
• Next in thread: Djerk Geurts: "RE: Connected interface appear as External"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART