From: Lars L. Christensen (lars@perseus.dk)
Date: Mon Jul 30 2007 - 18:08:22 ART
Hi Shine
You could redistribute connected into EIGRP, but this would not activate
EIGRP on the interfaces. So if you have 4 interfaces; two connected to core
and two connected customer, you could activate the two to core in EIGRP
using network statement and the two others with redistribute statement.
I believe this would accomplish your setup.
Cheers,
Lars "hopefully CCIE soon" Christensen
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> CCIE 19999
> Sent: 30. juli 2007 22:55
> To: ccielab@groupstudy.com
> Subject: Connected interface appear as External
>
> Hi Folks,
>
>
>
> Is there a way actually you can make a connected prefix appear as
> external?
>
> For example, 151.10.1.2 is a connected interface on R1 and the routing
> protocol is EIGRP.
>
> I am wondering if it is possible to make the prefix appear as D EX in
> router
> R1 instead of as Connected.
>
>
>
> TIA,
>
> Shine
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART