Re: FXO Caller ID prb

From: viny gm (vinygm@gmail.com)
Date: Sun Jul 29 2007 - 12:21:33 ART


Debug error msg

----------------------

get_fxo_caller_id:Caller ID receive failed. parseCallerIDString:no data.

config
--------------
voice-port 0/1/0

 cptone GB

 timeouts call-disconnect 3

 timeouts wait-release 3

 connection plar opx 300

 impedance complex2

  caller-id enable

!

voice-port 0/1/1

 cptone GB

 timeouts call-disconnect 3

 timeouts wait-release 3

 connection plar opx 300

 impedance complex2

  caller-id enable

!

voice-port 0/1/2

 cptone GB

 timeouts call-disconnect 3

 timeouts wait-release 3

 connection plar opx 300

 impedance complex2

  caller-id enable

!

voice-port 0/1/3

 cptone GB

 timeouts call-disconnect 3

 timeouts wait-release 3

 connection plar opx 300

 impedance complex2

 caller-id alerting dsp-pre-allocate

dial-peer voice 200 voip

 tone ringback alert-no-PI

 translation-profile outgoing addinPrefix

 preference 1

 destination-pattern 3..

 voice-class h323 1

 session target ipv4:xx.xx.xx.xx

 dtmf-relay h245-alphanumeric

 codec g711ulaw

 no vad

dial-peer voice 100 pots

 preference 1

 destination-pattern 9[2-9]......

 port 0/1/0

!

dial-peer voice 101 pots

 destination-pattern 9[2-9]......

 port 0/1/1

!

dial-peer voice 102 pots

 destination-pattern 9[2-9]......

 port 0/1/2

!

dial-peer voice 103 pots

 destination-pattern 9[2-9]......

Viny

On 7/29/07, wilfred d'souza <wilfred_thegr8@yahoo.co.in> wrote:
>
> Also your FXO Interface needs to be VIC-2FXO-M1 or VIC-2FXO-M2 for Caller
> ID Support.
>
> Wilfred
>
> *Mark Snow <msnow@ipexpert.com>* wrote:
>
> Two things - 1 are you using MGCP? While the gateway clearly does
> support Caller ID and FXO, CallManager only supports it through H323
> signaling. Also be sure that your FXO port has the "caller-id enable"
> config on it.
>
> Mark Snow
> Sr Technical Instructor
> IPexpert, Inc.
>
> Sent from my iPhone
>
> On Jul 29, 2007, at 7:00 AM, "viny gm" wrote:
>
> > Hi,
> >
> >
> >
> > I am getting a problem regarding caller id my FXO port is not
> > forwarding the
> > caller id to IP phone. When I am using same phone line with analog
> > phone the
> > caller id is coming on that
> >
> >
> >
> > Can any body help on this regards
> >
> >
> >
> > Viny
> >
> > _______________________________________________________________________
>
>
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> ------------------------------
> Yahoo! Movies<http://sg.rd.yahoo.com/mail/sg/footer/def/*http://sg.movies.yahoo.com>- Search movie info and celeb profiles and photos.



This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART