From: Bit Gossip (bit.gossip@chello.nl)
Date: Thu Jul 26 2007 - 07:07:00 ART
Hi Subodh,
I think they are the same and indeed the router converts the second form
into the first one once you type it in.
But the meaning is not to deny traffic for any host but to deny traffic FROM
any host as this is a standard ACL.
Bit.
r5(config)#access-list 1 deny 255.255.255.255 255.255.255.255
r5(config)#do show ip access-list
Standard IP access list 1
10 deny any
----- Original Message -----
From: <subodh.rawat@wipro.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, July 26, 2007 8:35 AM
Subject: Acess List question
> Just a question out of curiosity:
>
> Does "access-list 1 deny 0.0.0.0 255.255.255.255" and "access-list 1
> deny 255.255.255.255 255.255.255.255" has same effect? and they both
> will deny traffic for any host.
>
> I know in wild card 0 means match and 1 means ignore. Ideally they
> should be same statement.
>
>
> BR
> Subodh
>
>
>
> The information contained in this electronic message and any attachments
to
> this message are intended for the exclusive use of the addressee(s) and
may
> contain proprietary, confidential or privileged information. If you are
not
> the intended recipient, you should not disseminate, distribute or copy
this
> e-mail. Please notify the sender immediately and destroy all copies of
this
> message and any attachments.
>
> WARNING: Computer viruses can be transmitted via email. The recipient
should
> check this email and any attachments for the presence of viruses. The
company
> accepts no liability for any damage caused by any virus transmitted by
this
> email.
>
> www.wipro.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART