From: Mounir Mohamed (mounir.mohamed@gmail.com)
Date: Wed Jul 25 2007 - 06:44:10 ART
[mounir@unix-l1]$ more test.net
autostart=false
[localhost:7500]
[[3640]]
image = /home/mounir/image/c3640-js-mz.124-10a.image
ram = 128
disk0 = 0
disk1 = 0
[[Router sw1]]
idlepc = 0x604ec820
model = 3640
console = 2007
autostart = false
slot1 = NM-16ESW
F1/7 = sw2 f1/7
[[Router sw2]]
idlepc = 0x604ec820
model = 3640
console = 2008
autostart = false
slot1 = NM-16ESW
On 7/25/07, subodh.rawat@wipro.com <subodh.rawat@wipro.com> wrote:
>
> Please can u share ur .Net file? I have connected on F1/7 of Sw1 to Sw2
> F1/7 and I think this only required.
>
> Mine is below:
>
>
> [[Router SW1]]
>
> model = 3640
>
> console = 2007
>
> autostart = False
>
> slot0 = NM-16ESW
>
> slot1 = NM-16ESW
>
> F1/7 = SW2 F1/7
>
>
>
> [[Router SW2]]
>
> model = 3640
>
> console = 2008
>
> autostart = False
>
> slot0 = NM-16ESW
>
> slot1 = NM-16ESW
> Regards
> Subodh
>
> ------------------------------
> *From:* Mounir Mohamed [mailto:mounir.mohamed@gmail.com]
> *Sent:* Wednesday, July 25, 2007 2:55 PM
> *To:* Subodh Singh Rawat (WT01 - TELECOM SERVICE PROVIDER)
> *Cc:* djerk@djerk.nl; tohsoon28@gmail.com; ccielab@groupstudy.com
> *Subject:* Re: Basic switching trunking question..please answer
>
>
> Dear Subodh,
>
> Am also uploded ur config to 2 switches on dynagen and everthing working
> fine, erase ur config and do it again.
>
>
> sw1#show run int f1/7
> Building configuration...
>
> Current configuration : 56 bytes
> !
> interface FastEthernet1/7
> switchport mode trunk
> end
>
> sw1#show run int vlan 3
> Building configuration...
>
> Current configuration : 57 bytes
> !
> interface Vlan3
> ip address 3.3.3.1 255.255.255.0
> end
>
> sw1#show vtp status
> VTP Version : 2
> Configuration Revision : 1
> Maximum VLANs supported locally : 256
> Number of existing VLANs : 6
> VTP Operating Mode : Server
> VTP Domain Name : cisco
>
> sw1#show vlan-switch
>
> VLAN Name Status Ports
> ---- -------------------------------- ---------
> -------------------------------
> 1 default active Fa1/0, Fa1/1, Fa1/2, Fa1/3
>
> Fa1/4, Fa1/5, Fa1/6, Fa1/8
> Fa1/9, Fa1/10, Fa1/11,
> Fa1/12
> Fa1/13, Fa1/14, Fa1/15
> 3 VLAN0003 active
> 1002 fddi-default active
> 1003 token-ring-default active
> 1004 fddinet-default active
> 1005 trnet-default active
>
> VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1
> Trans2
> ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------
> ------
> 1 enet 100001 1500 - - - - - 1002
> 1003
> 3 enet 100003 1500 - - - - - 0
> 0
>
>
>
> *sw1#telnet 3.3.3.2
> Trying 3.3.3.2 ... Open*
>
>
> User Access Verification
>
> Password:
> sw2>ena
> Password:
> sw2#show run int f1/7
> Building configuration...
>
> Current configuration : 56 bytes
> !
> interface FastEthernet1/7
> switchport mode trunk
>
> sw2#show run int vlan 3
> Building configuration...
>
> Current configuration : 57 bytes
> !
> interface Vlan3
> ip address 3.3.3.2 255.255.255.0
> end
>
> sw2#show vtp stat
> sw2#show vtp status
> VTP Version : 2
> Configuration Revision : 1
> Maximum VLANs supported locally : 256
> Number of existing VLANs : 6
> VTP Operating Mode : Client
> VTP Domain Name : cisco
>
> sw2#show vlan-switch
> VLAN Name Status Ports
> ---- -------------------------------- ---------
> -------------------------------
> 1 default active Fa1/0, Fa1/1, Fa1/2, Fa1/3
>
> Fa1/4, Fa1/5, Fa1/6, Fa1/8
> Fa1/9, Fa1/10, Fa1/11,
> Fa1/12
> Fa1/13, Fa1/14, Fa1/15
> 3 VLAN0003 active
> 1002 fddi-default active
> 1003 token-ring-default active
> 1004 fddinet-default active
> 1005 trnet-default active
>
> Best Regards,
> Mounir Mohamed
>
>
>
> On 7/25/07, subodh.rawat@wipro.com <subodh.rawat@wipro.com> wrote:
> >
> > sw1#sh int fa1/7 switchport
> > Name: Fa1/7
> > Switchport: Enabled
> > Administrative Mode: trunk
> > Operational Mode: trunk
> > Administrative Trunking Encapsulation: dot1q
> > Operational Trunking Encapsulation: dot1q
> > Negotiation of Trunking: Disabled
> > Access Mode VLAN: 0 ((Inactive))
> > Trunking Native Mode VLAN: 1 (default)
> > Trunking VLANs Enabled: ALL
> > Trunking VLANs Active: 1,3
> > Priority for untagged frames: 0
> > Override vlan tag priority: FALSE
> > Voice VLAN: none
> > Appliance trust: none
> >
> > sw2#sh int fa1/7 switchport
> > Name: Fa1/7
> > Switchport: Enabled
> > Administrative Mode: trunk
> > Operational Mode: trunk
> > Administrative Trunking Encapsulation: dot1q
> > Operational Trunking Encapsulation: dot1q
> > Negotiation of Trunking: Disabled
> > Access Mode VLAN: 0 ((Inactive))
> > Trunking Native Mode VLAN: 1 (default)
> > Trunking VLANs Enabled: ALL
> > Trunking VLANs Active: 1,3
> > Priority for untagged frames: 0
> > Override vlan tag priority: FALSE
> > Voice VLAN: none
> > Appliance trust: none
> >
> >
> >
> > -----Original Message-----
> > From: Djerk Geurts [mailto:djerk@djerk.nl]
> > Sent: Wednesday, July 25, 2007 2:18 PM
> > To: 'Toh Soon, Lim'; Subodh Singh Rawat (WT01 - TELECOM SERVICE
> > PROVIDER)
> > Cc: ccielab@groupstudy.com
> > Subject: RE: Basic switching trunking question..please answer
> >
> > Add the following to the list from both switches:
> > - sh int f0/7 switch
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > > Of Toh Soon, Lim
> > > Sent: woensdag 25 juli 2007 7:34
> > > To: subodh.rawat@wipro.com
> > > Cc: ccielab@groupstudy.com
> > > Subject: Re: Basic switching trunking question..please answer
> > >
> > > Hi Subodh,
> > >
> > > Your configs look fine to me. This simple setup should work without
> > > issue.
> > >
> > > Anyway, can you provide us outputs of the following commands:
> > >
> > > - sh ip arp vl 3
> > > - sh spann vl 3
> > > - sh int status
> > > - sh int trunk
> > >
> > >
> > > Thank you.
> > >
> > > B.Rgds,
> > > Lim TS
> > >
> > >
> > > On 7/25/07, subodh.rawat@wipro.com <subodh.rawat@wipro.com> wrote:
> > > >
> > > > Hi Champs,
> > > >
> > > > A basic switching problem I am facing. Please see the diagram below:
> >
> > > >
> > > >
> > > > --- f1/7 f1/7 ---
> > > > |sw1|--------------------------------|sw2|
> > > > --- dot1Q Trunk ---
> > > >
> > > >
> > > > Switch 1 is VTp Server with domain CISCO Switch 2 is VTP Client with
> >
> > > > domain CISCO port f1/7 is configured as Dot1q encapsulation on both
> > > > the switches.
> > > > Only one VLAN, i.e. VLAN 3 is added on Sw1 and Same is
> > > reflected in Sw2
> > > > too when I see "show vtp status"
> > > > and "show vlan brief" command. Please note that this VLAn is not
> > > > associated with any physical interface of switch.
> > > >
> > > > When I see "sh int fa1/7 trunk" on both the switches, it shows as
> > > > trunking with dot1q encapsulation.
> > > >
> > > > IP address of VLAn 3 on SW1 is 3.3.3.1/24 while on sw2 is
> > > 3.3.3.2/24.
> > > >
> > > > "sh ip int br" also shows up,up for fa1/7 and vlan 3.
> > > >
> > > > I am not able to ping 3.3.3.1 from sw2 and 3.3.3.2 from
> > > sw1. However, I
> > > > can ping Ip of own switch, i.e. 3.3.3.2 from sw2 and
> > > 3.3.3.1 from sw1.
> > > >
> > > > Can somebody tell me what is wrong with my configuration?
> > > >
> > > > Another good thing is that, when I see "show cdp entry *"
> > > from either
> > > > switches, it shows information about other switch. e.g.
> > > when I see "show
> > > > cdp entry *" from sw1, it shows IP address of 3.3.3.2 (of
> > > sw2) in its
> > > > CDP database. It means layer 2 is working perfect and
> > > trunking is also
> > > > perfect. Trunking is working fine can be verified from the
> > > result that
> > > > VLAN 3 is present on sw2 which is VTP client for CISCO VTP domain.
> > > >
> > > > I am not sure why I am not able to ping VLAN 3 IP address
> > > of each other
> > > > switches.
> > > >
> > > >
> > > >
> > > > My configuration is below:
> > > >
> > > > Sw1
> > > > interface FastEthernet1/7
> > > > switchport trunk encapsulation dot1q switchport mode trunk !
> > > > interface Vlan3
> > > > ip address 3.3.3.1 255.255.255.0
> > > >
> > > > Sw2
> > > > interface FastEthernet1/7
> > > > switchport trunk encapsulation dot1q
> > > > switchport mode trunk
> > > > !
> > > > interface Vlan3
> > > > ip address 3.3.3.2 255.255.255.0
> > > >
> > > >
> > > > CDP output:
> > > > sw1#sh cdp entry *
> > > > -------------------------
> > > > Device ID: sw2
> > > > Entry address(es):
> > > > IP address: 3.3.3.2
> > > > Platform: Cisco 3640, Capabilities: Router Switch IGMP
> > > > Interface: FastEthernet1/7, Port ID (outgoing port):
> > > FastEthernet1/7
> > > > Holdtime : 128 sec
> > > >
> > > > Version :
> > > > Cisco IOS Software, 3600 Software (C3640-IS-M), Version
> > > 12.4(8), RELEASE
> > > > SOFTWAR
> > > > E (fc1)
> > > > Technical Support: http://www.cisco.com/techsupport
> > > > Copyright (c) 1986-2006 by Cisco Systems, Inc.
> > > > Compiled Mon 15-May-06 16:27 by prod_rel_team
> > > >
> > > > advertisement version: 2
> > > > VTP Management Domain: 'cisco'
> > > > Duplex: full
> > > >
> > > >
> > > > Regards
> > > > Subodh
> > > >
> > > >
> > > >
> > > > The information contained in this electronic message and
> > > any attachments
> > > > to
> > > > this message are intended for the exclusive use of the
> > > addressee(s) and
> > > > may
> > > > contain proprietary, confidential or privileged
> > > information. If you are
> > > > not
> > > > the intended recipient, you should not disseminate,
> > > distribute or copy
> > > > this
> > > > e-mail. Please notify the sender immediately and destroy
> > > all copies of
> > > > this
> > > > message and any attachments.
> > > >
> > > > WARNING: Computer viruses can be transmitted via email. The
> > > recipient
> > > > should
> > > > check this email and any attachments for the presence of
> > > viruses. The
> > > > company
> > > > accepts no liability for any damage caused by any virus
> > > transmitted by
> > > > this
> > > > email.
> > > >
> > > > www.wipro.com
> > > >
> > > >
> > > ______________________________________________________________
> > > _________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > > ______________________________________________________________
> > > _________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> >
> >
> > The information contained in this electronic message and any attachments
> > to this message are intended for the exclusive use of the addressee(s) and
> > may contain proprietary, confidential or privileged information. If you are
> > not the intended recipient, you should not disseminate, distribute or copy
> > this e-mail. Please notify the sender immediately and destroy all copies of
> > this message and any attachments.
> >
> > WARNING: Computer viruses can be transmitted via email. The recipient
> > should check this email and any attachments for the presence of viruses. The
> > company accepts no liability for any damage caused by any virus transmitted
> > by this email.
> >
> > www.wipro.com
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Best Reagrds,
> Mounir Mohamed
> The information contained in this electronic message and any attachments
> to this message are intended for the exclusive use of the addressee(s) and
> may contain proprietary, confidential or privileged information. If you are
> not the intended recipient, you should not disseminate, distribute or copy
> this e-mail. Please notify the sender immediately and destroy all copies of
> this message and any attachments. WARNING: Computer viruses can be
> transmitted via email. The recipient should check this email and any
> attachments for the presence of viruses. The company accepts no liability
> for any damage caused by any virus transmitted by this email.
> www.wipro.com
>
-- Best Reagrds, Mounir Mohamed
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART