From: Ben (bmunyao@gmail.com)
Date: Sun Jul 22 2007 - 04:03:05 ART
Thank you Joseph. I know that works, and to be able to continue with other
tasks of the lab, I have done that. However the task requirement is for the
transparent switch to be in domain 10.
Ben
On 7/22/07, Joseph Saad <joseph.s.saad@gmail.com> wrote:
>
> Try having VTP domain name as 789 on the VTP-Transparent-mode switch.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Ben
> Sent: Sunday, July 22, 2007 9:46 AM
> To: Cisco certification
> Subject: Re: vtp across transparent mode switch
>
> Vtp version 2 is enable in SW1,SW4,SW3
> Trunks are up between SW1--SW4--SW3
>
> Here are vtp debugs
>
> SW3
> 01:42:30: VTP LOG RUNTIME: Transmit vtp request, domain 789, start value 0
>
> SW4
> 01:42:33: VTP LOG RUNTIME: Dropping packet received on trunk Fa0/20 - not
> in
> domain 789
>
>
> Ben
>
>
>
>
>
> On 7/22/07, Ben <bmunyao@gmail.com> wrote:
> >
> >
> > Hi
> >
> > i once did a scenario as follows and succeeded in getting vlans
> > propagated by vtp across a transparent switch.
> >
> >
> > dot1q dot1q
> > SW1-----------------------SW4----------------------------SW3
> > vtp server vtp transparent vtp client
> >
> >
> > Today I'm trying the same and I can't figure out why its not working.
> >
> > Here is SW4 config:
> >
> > vtp domain 10
> > vtp mode transparent
> > !
> > spanning-tree mode mst
> > !
> > spanning-tree mst configuration
> > name IESTP
> > revision 10
> > instance 1 vlan 1, 5, 12, 107
> > instance 2 vlan 27, 34, 58
> > instance 3 vlan 46, 89, 363
> > !
> > spanning-tree mst 0-4 priority 24576
> > !
> > vlan 5,12,27,34,46,58,89,100,107,200,363
> >
> > Rack1SW4#sh vtp status
> > VTP Version : 2
> > Configuration Revision : 0
> > Maximum VLANs supported locally : 1005
> > Number of existing VLANs : 16
> > VTP Operating Mode : Transparent
> > VTP Domain Name : 10
> > VTP Pruning Mode : Disabled
> > VTP V2 Mode : Enabled
> > VTP Traps Generation : Disabled
> >
> >
> > SW1 config
> >
> > spanning-tree mode mst
> > spanning-tree extend system-id
> > !
> > spanning-tree mst configuration
> > name IESTP
> > revision 10
> > instance 1 vlan 1, 5, 12, 107
> > instance 2 vlan 27, 34, 58
> > instance 3 vlan 46, 89, 363
> > !
> >
> > Rack1SW1#sh vtp status
> > VTP Version : 2
> > Configuration Revision : 1
> > Maximum VLANs supported locally : 1005
> > Number of existing VLANs : 14
> > VTP Operating Mode : Server
> > VTP Domain Name : 789
> > VTP Pruning Mode : Disabled
> > VTP V2 Mode : Disabled
> > VTP Traps Generation : Disabled
> >
> > Rack1SW1#sh vl bri
> >
> > VLAN Name Status Ports
> > ---- -------------------------------- ---------
> > -------------------------------
> > 1 default active Fa0/1, Fa0/2, Fa0/3,
> Fa0/4
> >
> > Fa0/5, Fa0/6, Fa0/7,
> Fa0/8
> > Fa0/9, Fa0/10, Fa0/11,
> > Fa0/12
> > Fa0/14, Fa0/15, Fa0/16,
> > Fa0/17
> > Fa0/18, Fa0/19, Fa0/21,
> > Fa0/22
> > Fa0/23, Fa0/24, Gi0/1,
> > Gi0/2
> > 5 VLAN0005 active
> > 12 VLAN0012 active
> > 27 VLAN0027 active
> > 34 VLAN0034 active
> > 46 VLAN0046 active
> > 58 VLAN0058 active
> > 89 VLAN0089 active
> > 107 VLAN0107 active
> > 363 VLAN0363 active
> > 1002 fddi-default act/unsup
> > 1003 token-ring-default act/unsup
> > 1004 fddinet-default act/unsup
> > 1005 trnet-default act/unsup
> > Rack1SW1#
> >
> > SW3 trobleshooting
> >
> > Rack1SW3#
> > Rack1SW3#sh vtp status
> > VTP Version : 2
> > Configuration Revision : 0
> > Maximum VLANs supported locally : 1005
> > Number of existing VLANs : 5
> > VTP Operating Mode : Client
> > VTP Domain Name : 789
> > VTP Pruning Mode : Disabled
> > VTP V2 Mode : Disabled
> > VTP Traps Generation : Disabled
> > MD5 digest : 0x83 0xB7 0x38 0xD8 0x0F 0x49 0x38
> 0x45
> > Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
> > Rack1SW3#
> >
> > Rack1SW3#sh vl bri
> >
> > VLAN Name Status Ports
> > ---- -------------------------------- ---------
> > -------------------------------
> > 1 default active Fa0/1, Fa0/2, Fa0/3,
> Fa0/4
> > Fa0/5, Fa0/6, Fa0/7,
> Fa0/8
> >
> > Fa0/9, Fa0/10, Fa0/11,
> > Fa0/12
> > Fa0/13, Fa0/14, Fa0/15,
> > Fa0/16
> > Fa0/17, Fa0/18, Fa0/19,
> > Fa0/21
> > Fa0/22, Fa0/23, Fa0/24,
> > Gi0/1
> > Gi0/2
> > 1002 fddi-default act/unsup
> > 1003 token-ring-default act/unsup
> > 1004 fddinet-default act/unsup
> > 1005 trnet-default act/unsup
> > Rack1SW3#
> >
> > I would appreciate any comments or guidance
> >
> > Ben
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:41 ART