From: Marcus Lasarko (mlasarko@baltimorecountymd.gov)
Date: Thu Jul 19 2007 - 17:29:39 ART
This can also apply to a (hybrid|CatOS) switch as "msfcautostate"
More @ http://tinyurl.com/2dztvb
~M
>>> "Jason Sutterfield" <JSutterfield@chkenergy.com> 7/19/2007 3:04 PM >>>
There is an undocumented (at least I can't find it documented) command
under the VLAN interface; autostate.
The following works on the 18xx series running 12.4(11)T2 (not sure
about any other platform or code version).
Interface VLAN1
no autostate
That will stop the VLAN interface from tracking the physical port state
and make it stay up.
Jason
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
John Kim
Sent: Thursday, July 19, 2007 1:04 PM
To: ccielab@groupstudy.com
Subject: VLAN interface up without member port connection
Hi,
Is it possible to bring up the VLAN interface without any member port
connection?
Would you let me know how to do if possible?
Thanks,
JK
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:41 ART