From: HASHMI, FAISAL, ATTLABS (fhashmi@att.com)
Date: Tue Jul 17 2007 - 14:53:39 ART
Adam,
Is there a list of modules that we can pick from using dynamips...say if
we donot use NM16ESW then what are the other options...
Faisal
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ADAM CALLIS
Sent: Tuesday, July 17, 2007 12:34 PM
To: Jesse Loggins CCIE#14661
Cc: R&S CCIE GroupStudy; comserv@groupstudy.com
Subject: Re: Dynamips - ISIS
I have noticed that if you use the NM16ESW that you will see the high
utilization.. Thus, I don't use it.
On 7/17/07, Jesse Loggins CCIE#14661 <jlogginsccie@san.rr.com> wrote:
>
> Is there anyone else having issues with running ISIS under Dynamips?
When
> I
> configure 5 to 6 routers with ISIS I get very high CPU utilization on
my
> PC. I
> am able to run full labs of 10 or so routers on my PC using
BGP/OSPF/MPLS
> and
> all sorts of other things without issue, but I am unable to run 5
routers
> with
> ISIS only. I have tried tweaking the idlepc values after configuring
ISIS
> but
> I have had no luck. Does anyone know of any tweaks for Dynamips? One
thing
> worth noting I am using 3640's with NM16ESW's as my switch. I'm not
sure
> if
> this is the source of my problem. Any ideas would be appreciated.
>
>
> Jesse Loggins
> CCIE#14661 (R&S)
>
> _____________________________________________________________________
> Subscription information: http://www.groupstudy.com/list/comserv.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:41 ART