From: CCIE 19999 (ccie@iprimus.com.au)
Date: Mon Jul 16 2007 - 18:13:21 ART
John,
Please see the below link. The Doc CD talks about the enable secret and
lists it in the summary steps too.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hsec_c
/part30/hclivws.htm
SUMMARY STEPS
1. enable view
2. configure terminal
3. parser view view-name
4. secret 5 encrypted-password
5. commands parser-mode {include | include-exclusive | exclude} [all]
[interface interface-name | command]
6. exit
7. exit
8. enable [privilege-level] [view view-name]
9. show parser view [all]
HTH,
Shine
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
johngibson1541@yahoo.com
Sent: Tuesday, 17 July 2007 6:56 AM
To: ccielab@groupstudy.com
Subject: Re: Lawful intercept - is that what we do when the CIA/FBI
requests?
I just got in to a view based CLI for the first time
and created another CLI view.
You have to set "enable secret" before IOS lets you go
into root view. univercd doesn't reveal this secret.
John
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:41 ART