From: Nick Matthews (matthn@gmail.com)
Date: Mon Jul 16 2007 - 02:26:52 ART
The main difference is that the VWIC2 can support two different clock
sources on the card, and the VWIC can't.
On 7/16/07, Radioactive Frog <pbhatkoti@gmail.com> wrote:
>
> ON top of that, I just had a quick look through Cisco's Australian
> price-list and the price is the same for both cards.!
>
>
> On 7/16/07, Con Spathas <con@spathas.net> wrote:
> >
> > (re Telco) Not sure - it was a remote site so I never went there
> > personally! All I know is that it was old and coz it was in the sticks -
> > there was no way in hell it was being upgraded!
> >
> > (re VWIC) Most likely it's a design change in the card itself -
> > functionality is the same - that's my $0.02 worth. There could be more
> but I
> > dunno!
> >
> > ------------------------------
> > *From:* Radioactive Frog [mailto:pbhatkoti@gmail.com]
> > *Sent:* Monday, 16 July 2007 05:38
> > *To:* Con Spathas
> > *Cc:* Cisco certification
> > *Subject:* Re: vwic-mft-t1 vs vwic2-mft-t1
> >
> > What equipment (E1) the service provider/telecom company was using
> > (equipment = multiplexure or ?). There are a few brands of MUX which
> have
> > this type of glitches.
> >
> > But , still I can not figure out what the difference as mentioned in the
> > above posting.
> >
> > Frog
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:41 ART