From: Josef A (josefnet@gmail.com)
Date: Sun Jul 15 2007 - 09:10:26 ART
Maybe you should check the power supply and the requirement of the PIX, take
the first PIX to a different location and try it out.
Josef
On 7/15/07, Hash Aminu <hashng@gmail.com> wrote:
>
> have a pix in a customer and it keeps restarting every 15 min-17 mins , I
> brought another 515E and install there with the same configuration but it
> keeps rebooting also.
> Does anyone has any idea on this?
> TIA
> Hash
> QA-FW> sh ver
>
> Cisco PIX Firewall Version 6.3(4)
> Cisco PIX Device Manager Version 3.0(2)
>
> Compiled on Fri 02-Jul-04 00:07 by morlee
>
> QA-FW up 1 min 52 secs
>
> Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 433 MHz
> Flash E28F128J3 @ 0x300, 16MB
> BIOS Flash AM29F400B @ 0xfffd8000, 32KB
>
> 0: ethernet0: address is 0012.daf1.4e59, irq 10
> 1: ethernet1: address is 0012.daf1.4e5a, irq 11
> 2: ethernet2: address is 000e.0c66.6e03, irq 11
> Licensed Features:
> Failover: Disabled
> VPN-DES: Enabled
> VPN-3DES-AES: Disabled
> Maximum Physical Interfaces: 3
> Maximum Interfaces: 5
> Cut-through Proxy: Enabled
> Guards: Enabled
> URL-filtering: Enabled
> Inside Hosts: Unlimited
> Throughput: Unlimited
> IKE peers: Unlimited
>
> This PIX has a Restricted (R) license.
>
> Serial Number: 808522682 (0x303113ba)
> Running Activation Key: 0xc95b6d16 0x23388e41 0x0e46e171 0xbeb8bad7
> Configuration has not been modified since last system restart.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:41 ART