From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Jul 13 2007 - 19:46:22 ART
There are examples in the volume I technology labs for Anycast,
SSM, Bidir PIM, and MSDP. For R&S I would focus on PIM in sparse,
dense, and sparse-dense mode along with static RP assignments, auto-rp,
bsr, rpf failure, nmba designs, verification, and troubleshooting.
Anycast, SSM, Bidir, and MSDP are good to know but are generally more
Service Provider related topics.
HTH,
Brian McGahan, CCIE #8593 (R&S/SP/Security)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sadiq Yakasai
Sent: Friday, July 13, 2007 3:53 AM
To: Narbik Kocharians
Cc: sam s; Cisco certification
Subject: Re: IE Multicast on CoD
I shudve been more precise there. I was actually referring to R&S CoD
actually.
On 7/13/07, Narbik Kocharians <narbikk@gmail.com> wrote:
> I am sorry, but it won't be fair for me to make a comment, but from
what i
> hear they are pretty good.
>
>
> On 7/12/07, sam s <samarth_04@hotmail.com> wrote:
> >
> > I am referring to IE service provider cod..DAY5
> >
> >
> >
> > > Date: Thu, 12 Jul 2007 19:25:20 -0700
> > > From: narbikk@gmail.com
> > > To: samarth_04@hotmail.com
> > > Subject: Re: IE Multicast on CoD
> > > CC: sadiqtanko@gmail.com; ccielab@groupstudy.com
> >
> > >
> > > I hope you guys did not misunderstand me, i was just pointing to
the
> > > blueprint on Cisco's website and syaing that it is important to
know
> what
> > > they specify.
> > >
> > > On 7/12/07, sam s <samarth_04@hotmail.com> wrote:
> > > >
> > > > IE did cover all the topics listed below except for DVMRP in
thier COD
> > > > series. Brian McGahan did cover them well with examples...
> > > >
> > > > Best Wishes,
> > > > SAMARTH
> > > >
> > > >
> > > >
> > > >
> > > > > Date: Thu, 12 Jul 2007 12:53:04 -0700
> > > > > From: narbikk@gmail.com
> > > > > To: sadiqtanko@gmail.com
> > > > > Subject: Re: IE Multicast on CoD
> > > > > CC: ccielab@groupstudy.com
> > > > >
> > > > > I don't know about their CoD, but the following is what Cisco
says
> you
> > > > > should know, therefore, i recommend that you know the
following:
> > > > >
> > > > > *IP Multicast*
> > > > >
> > > > > 1. PIM, bi-directional PIM
> > > > > 2. MSDP
> > > > > 3. Multicast tools, source specific multicast
> > > > > 4. DVMRP
> > > > > 5. Anycast
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On 7/12/07, Sadiq Yakasai < sadiqtanko@gmail.com> wrote:
> > > > > >
> > > > > > Hi Guys,
> > > > > >
> > > > > > Just a quick question here please: After going through
> Internetwork
> > > > > > Expert's multicast on the CoD, i noticed that it has not
covered
> any
> > > > > > DVMRP/SSM/Bidirection PIM, and was wondering, is IE's
multicast
> > > > > > sufficient enough for the lab at all?
> > > > > >
> > > > > > I will appreciate some opinions on this please.
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Sadiq
> > > > > >
> > > > > >
> > > >
>
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:40 ART