FRTS - traffic-rate vs. cir/bc/be

From: Mike Kraus \(mikraus\) (mikraus@cisco.com)
Date: Thu Jul 12 2007 - 14:00:31 ART

• Next message: jatinder.p.singh@bt.com: "RE: tftp ios"
• Previous message: dreamer1109@hotmail.com: "Passed at RTP on my third attempt (07/10)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Is the only reason you would use the frame-relay cir/bc/be commands over
the frame-relay traffic-rate command because you want to adjust the Tc?

For example, the below two would be equivalent, correct?

******
map-class frame-relay test1
  frame-relay traffic-rate 32000 64000
******
map-class frame-relay test2
 frame-relay cir 32000
 frame-relay bc 4000
 frame-relay be 4000
******

Thanks,
  Mike

• Next message: jatinder.p.singh@bt.com: "RE: tftp ios"
• Previous message: dreamer1109@hotmail.com: "Passed at RTP on my third attempt (07/10)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:40 ART