Multicast- Auto RP Question

From: Amit Kohli (amitkohli18@yahoo.com)
Date: Mon Jul 09 2007 - 11:38:37 ART

Next message: Djerk Geurts: "RE: Funky acl question-Check if this is correct"
Previous message: Mohamed M Moustafa: "RE: Funky acl question-Check if this is correct"
Next in thread: Ivan: "Re: Multicast- Auto RP Question"
Maybe reply: Ivan: "Re: Multicast- Auto RP Question"
Maybe reply: Salau, Yemi: "RE: Multicast- Auto RP Question"
Maybe reply: Jason Guy \(jguy\): "RE: Multicast- Auto RP Question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi

  In multicast, if I have the below configuration


  ip pim auto-rp listener (On every Router)
  no ip pim dm-fallback (On every Router)
  ip pim send-rp-announce loopback0 scope 16
  ip pim send-rp-discovery loopback0 scope 16
  int lo0
  ip pim sparse-dense-mode


  In the above configuration all the routers will work in sparse mode or dense mode?

  Does the command " ip pim sparse-dense-mode" takes precedence over the command " ip pim auto-rp-listener" ?

  Thanks
  Amit

---------------------------------
Moody friends. Drama queens. Your life? Nope! - their life, your story.
Play Sims Stories at Yahoo! Games.

Next message: Djerk Geurts: "RE: Funky acl question-Check if this is correct"
Previous message: Mohamed M Moustafa: "RE: Funky acl question-Check if this is correct"
Next in thread: Ivan: "Re: Multicast- Auto RP Question"
Maybe reply: Ivan: "Re: Multicast- Auto RP Question"
Maybe reply: Salau, Yemi: "RE: Multicast- Auto RP Question"
Maybe reply: Jason Guy \(jguy\): "RE: Multicast- Auto RP Question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:40 ART