From: Amit Kohli (amitkohli18@yahoo.com)
Date: Mon Jul 09 2007 - 10:45:58 ART
3 lines tho
permit 10.0.5.0 0.0.0.255 (Permit only .5)
permit 10.0.10.0 0.0.5.255 (Permit only .10 and .15)
permit 10.0.12.0 0.0.1.255 (Permit only .12 and .13)
Let me know if this is correct?
Thanks
Amit
Edison Ortiz <edisonmortiz@gmail.com> wrote:
Better approach here :
permit 10.0.5.0 0.0.5.255
permit 10.0.12.0 0.0.3.255
_________
Edison Ortiz
(Routing and Switching, CCIE # 17943)
----- Original Message -----
From: "Edison Ortiz"
To: "Eric Dobyns" ;
Sent: Monday, July 09, 2007 8:04 AM
Subject: Re: Funky acl question
> deny 10.0.6.0 0.0.1.255
> permit 10.0.5.0 0.0.10.255
>
> _________
> Edison Ortiz
> (Routing and Switching, CCIE # 17943)
> ----- Original Message -----
> From: "Eric Dobyns"
> To:
> Sent: Monday, July 09, 2007 3:23 AM
> Subject: Funky acl question
>
>
>> Take these subnets:
>>
>>
>>
>> 10.0.5.0/24
>>
>> 10.0.10.0/24
>>
>> 10.0.12.0/24
>>
>> 10.0.13.0/24
>>
>> 10.0.15.0/24
>>
>>
>>
>> And write two-line ACL to permit them without permitting 10.0.6.0/24,
>> 10.0.7.0/24..and the other subnets included in the range.
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:40 ART