From: Bob Sinclair (bob@bobsinclair.net)
Date: Thu Jul 05 2007 - 17:48:47 ART
wim.depauw@getronics.com wrote:
> Hi,
>
> I'm wrestling with a simple BSR configuration :
> I created the following network
>
> R1----FR-----R4----HDLC-----R5----ETH----E2
> |--------------------FR------------------ |
>
>
If your BSR is on a spoke, then try enabling nbma-mode on the hub. In
my experience, the hub will not resend the BSR messages on an incoming
interface, unless you use the nbma-mode enhancement.
HtH,
--Bob Sinclair CCIE 10427 CCSI 30427 www.netmasterclass.net
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:40 ART