Re: identical routing database

From: Ben Zheng (bzheng8989@yahoo.com)
Date: Thu Jun 28 2007 - 14:06:27 ART

• Next message: Colin McNamara: "Re: Passed R&S Lab in Sydney"
• Previous message: Antonio Soares: "RE: Arp Security"
• Maybe in reply to: Ben Zheng: "identical routing database"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

by route-leaking from L2 to L1, the L2 routes on L1/L2 router will be shown as inter-area (ia) route on L1 router. Is the "identical routing database" requirement still met?

Thanks,

Ben

----- Original Message ----
From: Ozgur Guler <ozgur11@gmail.com>
To: Ben Zheng <bzheng8989@yahoo.com>
Cc: ccielab@groupstudy.com
Sent: Wednesday, June 27, 2007 11:21:08 PM
Subject: Re: identical routing database

You might need to configure route-leaking on one of your L1/L2 routers.

On 6/28/07, Ben Zheng <
bzheng8989@yahoo.com
> wrote:Assume R1, R2 and R3 are on the same vlan. R1 and R2 are L1/L2 router in ISIS domain. R3 is a level-1-only router. What configuration is required in order for R3 to have the identical routing database with R1 and R2?

TIA,

Ben

• Next message: Colin McNamara: "Re: Passed R&S Lab in Sydney"
• Previous message: Antonio Soares: "RE: Arp Security"
• Maybe in reply to: Ben Zheng: "identical routing database"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:52 ART