From: Ma, Zifang (zifang.ma@eds.com)
Date: Tue Jun 26 2007 - 22:04:55 ART
Hi Group
Hope someone can help with my Dynamips issue.
I followed the article "How To Run Cisco IOS On Your PC With Dynamips"
and installed everything mentioned. All worked great, I could ping the
Win loopback 169.254.0.1 and Teraserv 169.254.0.2 without any problem on
my local pc. But when I booted the terminal server I could not access
any devices through reverse telnet. I later found out it was because I
could not ping loopback interface 169.254.0.1 from terminal server, but
the show ip arp shows correctly the loopback ip and mac. Arp -a on
windows also shows correctly the terminal server's IP and mac. I could
telnet any device from local PC using telnet 169.254.0.1 200x. The only
problem is the terminal server can not talk to the Win loopback
interface. I tried to use the NIC's IP as well but got exactly the same
problem.
Please point me to the right direction if you had come across this
before.
Thanks a lot.
zif
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:52 ART