From: Joseph Saad (joseph.s.saad@gmail.com)
Date: Fri Jun 22 2007 - 12:16:33 ART
Rightly said. On top of that, you only need to worry if you are using the
same subnet across hub and the spokes.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Daniel Fredrick
Sent: Friday, June 22, 2007 7:12 PM
To: joh willi
Cc: ccielab@groupstudy.com
Subject: Re: eigrp
Usually you only worry about that when that in a Hub-Spoke topology. You
would disable split horizon on the HUB router interface. If you have just a
point-to-point setup... you don't have to worry about it.
HTH,
On 6/22/07, joh willi <wjoh71@gmail.com> wrote:
>
> Hi all,
>
> I am trying to configure eigrp in frame relay setup. The interfaces are
> main physical interfaces. Should I worry about split-horizon?.
>
> thanks,
> joh
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Daniel Fredrick CCIE# 17094
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:50 ART