From: Salau, Yemi (yemi.salau@siemens.com)
Date: Tue Jun 19 2007 - 06:02:27 ART
Hello Henk,
Why not bounce the interface's config from the running config:-
Router(config)#do wr
Router(config)#default int s0/0
Router(config)#exit
Router#config memory
Router(config)#copy start run
BINGO!
Many Thanks
Yemi Salau
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sadiq Yakasai
Sent: 19 June 2007 00:10
To: Henk Botha
Cc: ccielab@groupstudy.com
Subject: Re: Frame-Relay inarp
Hey Henk,
have u tried "clear frame inarp" and it doesnt work?
On 6/18/07, Henk Botha <henkbotha@hotmail.com> wrote:
> The only way I know how to clear Dynamic mappings from a router after
I
> used the No Frame-relay inverse-arp command is to restart the router.
>
> Is there another way to clear the frame-relay inarp without reloading
the
> router? This will save so much time.
>
> Normally I shutdown the interface before enable Frame-Relay
encapsulation
> but the problem is if I work on a lab that is already partially setup
the
> mappings have already been learned.
>
> Any help to save some time.
>
> Thanks
>
> Henk
>
>
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:49 ART