From: Narbik Kocharians (narbikk@gmail.com)
Date: Mon Jun 18 2007 - 17:02:57 ART
3550s definitely do need the reflector ports
On 6/18/07, Eric Dobyns <eric_dobyns@yahoo.com> wrote:
>
> I believe 3550s require a reflector port.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> premkumar somasundaram
> Sent: Wednesday, June 13, 2007 7:14 AM
> To: ccielab@groupstudy.com
> Subject: When do we require reflector port in RSPAN
>
> Group.
> As my understanding , RSPAN is used to montior the traffic when the source
> port is connected to say switch A and destination port is conneced to
> Switch
> B. The configuration is as follows.
>
> Switch A
>
> vlan 100
> remote-span
>
> monitor session 1 source vlan 150
> monitor session 1 destination remote vlan 100
>
>
> Switch B
>
> vlan 100
> remote-span
>
> monitor session 1 source remote vlan 100
> monitor session 1 destination port fast0/6
>
> I believe the above configuration is right. Do we require reflector port.
> If
> yes when do we require it.
>
>
> Thanks
> Prem
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Narbik Kocharians CCIE# 12410 (R&S, SP, Security) CCSI# 30832
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:49 ART