From: Peter Svidler (doubleccie@yahoo.com)
Date: Sun Jun 17 2007 - 04:15:14 ART
I went through this document and few others , I created the NAR on the group directly , still i get authentication failure when the user (belongs to the group ) tries to login to the router , if i removed the NAR configuration ..the user can login normally
i get the authentication failure on the reports due to "No Filters activated"
do I need to enable anything on the router other than authentication and authorization exec method lists?
Tarun Pahuja <pahujat@gmail.com> wrote:
Peter,
Are you applying the filter to the right group? I would suggest that you look at the following url. There are a number of Variables in NAR that would have to be configured correctly for it to work.
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_user_guide_chapter09186a008052e960.html#wp697095
HTH,
Tarun
On 6/17/07, Peter Svidler <doubleccie@yahoo.com> wrote: Guys ;
I am trying to configure Network access restriction on the ACS ,my authentication and authorization is working fine on the router before enabling NAR , but when i enabled per-group NAR and speicified certain subnet .i keep getting authentication failure error , on the ACS failed attempts report i get the following error "authentication failure , No active filter "
what else do i need to configure , is there anything need to be done on the router , or something is missing on the ACS?
---------------------------------
It's here! Your new message!
Get new email alerts with the free Yahoo! Toolbar.
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:49 ART