From: Stephen Lee (slee@packet360.com)
Date: Wed Jun 13 2007 - 09:49:22 ART
If I am not mistaken only the 3550 requires the reflecter port.
Thanks,
Steve
Stephen S. Lee
Senior Systems Engineer
slee@packet360.com
PACKET360, INC.
100 East Shore Drive
Glen Allen, VA 23059 USA
Direct 804.545.4705
Main 804.545.4700
Toll Free 877.998.3600
Fax 804.545.4759
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
premkumar somasundaram
Sent: Wednesday, June 13, 2007 8:14 AM
To: ccielab@groupstudy.com
Subject: When do we require reflector port in RSPAN
Group.
As my understanding , RSPAN is used to montior the traffic when the
source
port is connected to say switch A and destination port is conneced to
Switch
B. The configuration is as follows.
Switch A
vlan 100
remote-span
monitor session 1 source vlan 150
monitor session 1 destination remote vlan 100
Switch B
vlan 100
remote-span
monitor session 1 source remote vlan 100
monitor session 1 destination port fast0/6
I believe the above configuration is right. Do we require reflector
port. If
yes when do we require it.
Thanks
Prem
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:48 ART