From: Tarun Pahuja (pahujat@gmail.com)
Date: Wed Jun 13 2007 - 03:43:52 ART
Sebastan,
Your configuration looks good. Seems like you are having
connectivity problems between the Management interfaces. When
you remove management-only command under the management interface it can
pass traffic like any other interface . The only difference is that it is
10/100. Also, Make sure that you are not using a cross over cable between
the management interfaces, they should be connected to a switch.
When using VLANs, use a dedicated VLAN for the failover link. Sharing the
failover link VLAN with any other VLANs can cause intermittent traffic
problems and ping and ARP failures.
HTH,
Tarun Pahuja
CCIE#7707(R&S,Security,SP,Voice,Storage),CCSI
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:48 ART