From: CCIE GOAL (ccie.goal@gmail.com)
Date: Wed Jun 06 2007 - 23:05:38 ART
Hi Tarun,
Thanks for tip, I have checked my solution and it works fine...
My doubt was regarding the question interpretation: "Configure R1 only
to receive subnet prefixes bellow 198.0.0.0/8.
From my point of view I need to manipulate the mask length to allow
the prefixes from /8 to bellow (/32)...
Best Regards.
Luciano
2007/6/6, Tarun Pahuja <pahujat@gmail.com>:
> Luciano,
> Always verify your answer in adition to asking the proctor,
> sometimes your investigation can show better results. With Prefix-lists you
> not only matching IP address Bits but also the subnet mask information.
>
> Create a couple of networks
>
> 198.0.0.0/8
> 198.1.0.0/16
> 198.1.1.0/24
> 198.0.0.0/16
>
> Use the prefix list you just created and see if you achieve the desired
> results. Your prefix list is permitting subnet mask less than equal to 32,
> was that the requirement?
> Tarun Pahuja
> CCIE#7707(R&S,Security,SP,Voice,Storage),CCSI
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:47 ART