From: Xiangling (xianglingzj@gmail.com)
Date: Wed Jun 06 2007 - 13:38:16 ART
Hi, All,
Need some help on dampening.
I configured the router to enable dampening on two routes, namely
112.0.0.0/8 and 113.0.0.0/8. I used a route-map to match it. But after I
apply the route-map the router will have errors saying "Bad parameters in
route-map ..."
My detailed configuration below,
Rack1R6#
*Mar 4 03:11:07.371: %BGP-3-BADROUTEMAP: Bad parameters in the route-map 54
applied for Dampening
Rack1R6#sh run | i dampen
bgp dampening route-map 54
Rack1R6#sh route-map 54
route-map 54, permit, sequence 10
Match clauses:
ip address prefix-lists: 54
Set clauses:
Policy routing matches: 0 packets, 0 bytes
Rack1R6#sh ip pref 54
ip prefix-list 54: 2 entries
seq 5 permit 112.0.0.0/8
seq 10 permit 113.0.0.0/8
Rack1R6#
*Mar 4 03:12:07.383: %BGP-3-BADROUTEMAP: Bad parameters in the route-map 54
applied for Dampening
Rack1R6#
Has anybody experienced the same thing before? Is it my configuration
problem? or some bug with the IOS? Please advise, thanks.
-- Thanks & Regards, Xiangling |-------------------------| | | \ I Love You All / \ / \___________/
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:47 ART