From: brajesh.thakur@wipro.com
Date: Wed Jun 06 2007 - 06:05:06 ART
Dear Javier,
I have faced this problem earlier at one of customer places, but I was
using Merit Radius server. We had to configure the client type as
'cisco' on radius server against IP address of our router and it worked
fine. I am not very sure about cisco ACS, please check the client type
once.
Warm Regards,
Brajesh Thakur
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Javier Liendo
Sent: Wednesday, June 06, 2007 7:55 AM
To: Tarun Pahuja
Cc: ccielab@groupstudy.com
Subject: Re: downloadable ACL using radius on a router?
thank you tarun...i've already gone through the document but the
configuration described is also around a PIX and not an IOS
router...
regards
javier
On 6/5/07, Tarun Pahuja <pahujat@gmail.com> wrote:
> Javier,
> Hope this helps.
>
>
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configura
tion_guide_chapter09186a00801fd914.html
>
> Tarun Pahuja
> CCIE#7707(R&S,Security,SP,Voice,Storage),CCSI
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:47 ART