From: Shakeer AC (shakeerac@gmail.com)
Date: Tue Jun 05 2007 - 10:33:10 ART
Hi David,
Use the command no frame-relay inarp on the interface.
clear the frame-relay inarp , save and reboot.
This should clear all the unused PVC.
Regards,
Shakeer
On 6/5/07, Boaz David <boazdavi@gmail.com> wrote:
>
> Dear group,
>
> I am studying the CCIE lab. I have the WB from IPexpert.
>
> I worked through several labs. Since I always delete and build new
> Frame-relay PVC on serial interface, I found a lot of unused PVC on that
> interfaces even I only config like
>
> interface s0/0.24 point-to-point
> frame-relay interfac-dlci 104
> ...
> ...
>
> If I show frame-relay pvc, I can see PVC 104 togather with other
> previously
> configured PVCs.
>
> like this
>
> DLCI = 104, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0
> DLCI = 105, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
> Serial0/0
>
>
> Is there any method to clear it out (say 105) as it difficult to my
> troubleshooting?
>
> Anyone can help?
>
> Boaz
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:46 ART