From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Wed May 30 2007 - 19:41:54 ART
-I would take the assessor about a month prior to your lab date. That way
you can sharpen up a bit and revise your strategy.
-You have two hours to play with the gear and figure out where you went
wrong. You can't run the assessment report during this time.
-I would schedule your review period for an hour or so after you take the
lab. That way everything is still fresh and you've had some time to think
about it.
-You will only have access to your assessment (score) report after you've
finished everything. You will not have access to the scenario or diagrams.
On 5/30/07, Antonio Soares <amsoares@netcabo.pt> wrote:
>
> Hello group,
>
> I would like to try the Cisco Assessor Labs and i looking for some inputs
> from those who took it:
>
> - when to do it ? Close to the lab date of before the lab payment is made
> ?
> - each lab has 4 hours plus 2 additional hours for review. The faq says
> that
> we can review and change configurations in these 2 addititional hours. How
> does it work?
> - we can schedule the 2 additional hours at least one hour later the 4
> hours
> lab. What is the best option ? Right after the lab is finished (1 hour) ?
> - Do we have access to the lab materials after the lab is done ? For
> example, is it possible to have all the info needed to repeat the lab in
> our
> own rack ?
>
> Please post other comments you may find interesting.
>
> Thanks,
> Antonio
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Ronald Angello CCIE #17846
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART