From: marc fernandez (mag08036@yahoo.com)
Date: Wed May 30 2007 - 02:47:36 ART
Tarun,
I configured everything just like the document you
advised to reference. I am still getting the same
issue. I connect but I am getting the wrong gateway.
Ethernet adapter Local Area Connection 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Cisco
Systems VPN Adapter
Physical Address. . . . . . . . . :
00-05-9A-3C-78-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . :
192.168.1.201
Subnet Mask . . . . . . . . . . . :
255.255.255.0
Default Gateway . . . . . . . . . :
192.168.1.201
--- Tarun Pahuja <pahujat@gmail.com> wrote:
> Marc,
> Can you paste your configuration? What
> problems are you having.
> Please take a look at the following document.
>
>
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805734ae.shtml
>
> Thanks,
> Tarun
>
>
> On 5/29/07, marc fernandez <mag08036@yahoo.com>
> wrote:
> >
> > Currently I have my pix outside ip address as dhcp
> > client. The pix is dhcp server for my inside
> network.
> > I am trying to set up remote access via cisco vpn
> > client to my inside network. Does anyone have a
> config
> > they can share. I've tried but have failed
> miserably
> > so far.
> >
> > Your help is appreciated.
> >
> > Regards,
> > Marc
> >
> >
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART