From: Kim (support@isolvesystems.com)
Date: Tue May 29 2007 - 18:18:54 ART
Does R1 and R5 routing table contains route to each other?
On 5/29/07, ccie anees <ccieanees@yahoo.com> wrote:
>
> I have an issue in pinging between spoke routers.
> R3 is a hub router.
>
> ------ R1
> |
> R3 ---
> |
> ------ R5
>
> R3
> interface Serial1/0
> no ip address
> encapsulation frame-relay IETF
> frame-relay interface-dlci 301 ppp Virtual-Template13
> frame-relay interface-dlci 305 ppp Virtual-Template35
> no frame-relay inverse-arp
> !
> interface Virtual-Template13
> ip address 167.1.135.3 255.255.255.0
> !
> interface Virtual-Template35
> ip address 167.1.135.3 255.255.255.0
> !
> router eigrp 10
> network 167.1.135.3 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.3.3
> R1
> interface Serial0/0
> no ip address
> encapsulation frame-relay
> frame-relay interface-dlci 103 ppp Virtual-Template13
> no frame-relay inverse-arp
> !
> interface Virtual-Template13
> ip address 167.1.135.1 255.255.255.0
> !
> router eigrp 10
> network 167.1.135.1 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.1.1
>
> R5
> interface Serial0/0
> no ip address
> encapsulation frame-relay IETF
> frame-relay interface-dlci 503 ppp Virtual-Template35
> no frame-relay inverse-arp
> !
> interface Virtual-Template35
> ip address 167.1.135.5 255.255.255.0
> !
> router eigrp 10
> network 167.1.135.5 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.5.5
>
> Result:
> R3:
> Rack1R3#ping 167.1.135.1
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 167.1.135.1, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 56/58/60 ms
> Rack1R3#ping 167.1.135.5
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 167.1.135.5, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 56/59/60 ms
> Rack1R3#
>
> Problem:
> R5
>
> Rack1R5#ping 167.1.135.3
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 167.1.135.3, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 56/59/60 ms
> Rack1R5#
>
> Rack1R5#ping 167.1.135.1
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 167.1.135.1, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
>
>
> ---------------------------------
> Luggage? GPS? Comic books?
> Check out fitting gifts for grads at Yahoo! Search.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- http://www.isolvesystems.com
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART