From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue May 29 2007 - 12:55:37 ART
Don't run 12.4, run 12.2S. The "S" train is a service provider
train that contains different MPLS features than the other versions.
You can find some templates for running an SP topology on dynamips here:
http://www.internetworkexpert.com/resources/dynamips.htm
HTH,
Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Robert Hosford
Sent: Tuesday, May 29, 2007 10:42 AM
To: Marko Milivojevic; ccielab@groupstudy.com
Subject: RE: Service Provider track
I am having problems getting c7200p-adventerprisek9-mz.124-11.T.bin to
run
on dynamips. Is anyone else having this problem?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Marko Milivojevic
Sent: Tuesday, May 29, 2007 10:20 AM
To: ccielab@groupstudy.com
Subject: RE: Service Provider track
I'll second this. Dynamips is great tool, however there are some
limitations
that cannot be solved by it. Most notably, it won't help you much in
switching parts of scenarios, nor for ATM SVC's. For thos, you may wish
to
rent some rack time online.
Once you get a hang of it, it's really quick to setup new labs. I se
embedded initial configurations to make it even quicker. Really nice
stuff
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Brian Dennis
Sent: 29. mam 2007 11:05
To: Michael Marran; ccielab@groupstudy.com
Subject: Re: Service Provider track
You might look into using Dynamips. Most SP candidates are using it for
lab
preparation.
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART