From: JOHN MATHAI (john_t_mathai@hotmail.com)
Date: Tue May 29 2007 - 02:02:09 ART
Ronnie,
This was quite useful.
john t m
--------------------------------------------------------------------
From: "Ronnie Angello" <ronnie.angello@gmail.com>
Reply-To: "Ronnie Angello" <ronnie.angello@gmail.com>
To: "Rob McDonald" <robmexpert@gmail.com>
CC: "Cisco certification" <ccielab@groupstudy.com>
Subject: Re: TCL
Date: Mon, 28 May 2007 23:46:05 -0400
They don't support TCL but you can use a macro.
CAT1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
CAT1(config)#macro name ping
Enter macro commands one per line. End with the character '@'.
do ping 10.10.123.1
do ping 10.10.123.2
do ping 10.10.123.3
do ping 10.10.34.3
do ping 10.10.34.4
do ping 10.10.34.15
do ping 10.10.34.16
@
CAT1(config)#macro global apply ping
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.123.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/5/8 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.123.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/8/12 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.123.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.34.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.34.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.34.15, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.34.16, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
CAT1(config)#
On 5/28/07, Rob McDonald <robmexpert@gmail.com> wrote:
>
> Hello,
>
> Is there a quick way to run the tcl scripts on the 3550s and 3560s
for the
> ping test as we have them for the Routers.
>
> Thanks,
>
>
_______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
--
Ronald Angello
CCIE #17846
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
------------------------------------------------------------------------
Shaadi.com Matrimonials. Register FREE!
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART