From: Bit Gossip (bit.gossip@chello.nl)
Date: Mon May 28 2007 - 04:22:46 ART
Group,
following my previous posting:
http://groupstudy.com/archives/ccielab/200705/msg01128.html
I find another wierd thing about the MQC version of the police command:
Whatever value I assign to the be it doesn't make any difference in the 'show
policy-map int'
Any idea? Also on my previous post....
Thanks,
Luca
~~~~~~~~~~~~~~~~~~
class-map match-all T72
match protocol icmp
!
policy-map T72
class T72
police cir 128000 bc 4000 be 5000
~~~~~~~~~~~~~~~~~~~~~~~~
Rack1R1#show policy-map int f0/0
FastEthernet0/0
Service-policy output: T72
Class-map: T72 (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: protocol icmp
police:
cir 128000 bps, bc 4000 bytes
conformed 0 packets, 0 bytes; actions:
transmit
exceeded 0 packets, 0 bytes; actions:
drop
conformed 0 bps, exceed 0 bps
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART